Tel: 509-840-0665 | Mail:


Central Lubrication Systems for Saw Mills and Log Yards

Sawmill 1

Disadvantages of Manual Greasing

With manual lubrication during a machine standstill, the lubricant is supplied just to one area of the friction point and cannot distribute itself.

The bearing is more or less “overfilled” with grease until the lubricant flows out.

The lubricating film at the friction point is quickly used up, resulting in a lack of lubrication. From this moment on, wear and tear increases rapidly.

BekaWorld Central Lubrication Has the Solution

Distribution Block

With central lubrication, the highly loaded bearing points are lubricated during operation.

The lubricant reliably reaches all points of the bearing and the lubricating film is constantly renewed with exact metered quantities.

This means: Drastically reduced wear and tear!